你可能感兴趣的试题
connecting rods main bearing column tie rods
An emergency stop of the main engine to avoid a collision. An emergency reversal operation of the main engine to avoid a collision. An stop of the main engine to avoid a collision. A reversal operation of the main engine to avoid a collision."
air filtration is inadequate engine coolant leaking into the lube oil fuel oil is leaking into the lube oil the piston rings are excessively worn
fuel injectors exhaust valves intake valves all of the above
prepare to stop the engine assemble an engine on its bedplate make an engine ready for starting make an engine run steadily
Each engine must have its own engine driven cooling water pump capable of providingcooling for all ranges of operation propulsion engines with bores exceeding 200 mm are to be fitted with a means to displaythe cooling water temperature of each cylinder At least two independent sea sucti8ons are to be provided for supplying water to theengine jackets or to the heat exchangers Suitable strain are to be fitted between the circulating pumps and heat exchangerswhen sea water is used for direct cooling
Full Ahead Half Ahead Full Astern Half Astern
“prepare to stop the engine ” “assemble an engine on its bedplate ” “make an engine ready for starting ” “dismantle an engine ”
the start fails the fuel pumps will be put into operation the fuel valves are damaged the combustion process will take over
They should wear safety shoes They should wear ear protection They should not wear jewelry All of the above
tried; couldn't have tried; won't tried; won't have tried; can’t
injecting fuel oil into a cylinder removing exhaust gases from the cylinder forcing air into the cylinders under pressure after the exhaust valve has dosed a combination of all the above
Stop Engine No Engine Revolutions Stand-by Engine Finished With Engine
eliminate hot air from the condenser maintain steady pressure in a system heat, or cool one fluid by means of another fluid reduce the engine room temperature in tropical climates
coolant for the distillate coolant for the brine cooler means of heating the feedwater primary means of producing a vacuum within the distiller
increase the exhaust temperature increase the power of reduce the speed increase the fuel consumption